Husqvarna 525RX Operator's Manual page 11

2. Align the tab of the cutting attachment (A) with the
arrow of the coupling (B).
B
3. Carefully push the shaft into the coupling until you
hear a click.
4. Tighten the knob fully.
To disassemble the two-piece shaft
525RK
1. Turn the knob 3 turns or more to loosen the
coupling.
2. Push and hold the button (C).
3. Hold tight to the end of the shaft that the engine is
attached to.
1345 - 002 - 03.06.2022
4. Pull the attachment straight out of the coupling.
A
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
To attach a blade guard, grass blade and
grass cutter
Note:
Accessories on page 27 .
C
WARNING:
Use protective gloves.
WARNING:
Always use the cutting
attachment guard that is recommended for
the cutting attachment. See
page 27 .
WARNING:
An incorrectly attached
cutting attachment can result in injury or
death.
CAUTION:
Make sure that the guard
extension is removed.
Use the recommended blade guard. Refer to
Accessories on
11