Table of Contents
Advertisement
Cleaning the rollers
Clean the rollers each time you replace a film pack. To clean
the rollers:
1
Open the door of the camera back.
2
Remove the rollers by placing your thumbs at the ends of
the roller assembly and rotating it upward.
3
While the rollers are out of the camera back, wipe them
gently with a clean, lint-free cloth moistened with water.
Caution: Use water only; other cleaning solutions may
permanently damage the rollers.
4
Replace the rollers by placing the assembly against the
film exit door and rotating it downward.
2-5
Advertisement
Table of Contents
