Table of Contents
Advertisement
Taking the photo
3-4
6
If your subject has a dark complexion, press the face
brightener (Boost) button. Refer to The camera, in
Chapter, 1 for location of the button. A green Boost light
will illuminate in the LED display. The face brightener
function turns off and its light goes out after you take the
picture. To turn the face brightener function off before
you take the picture, press the button again.
When you turn the Face Brightener function on, the
camera increases the flash output by 0.3 to 0.5
photographic stops.
To take a photo:
1
Press the Shutter button.
After you press the button, the green Pull Film light
illuminates in the LED display; if the camera is set to take
another picture on this sheet of film, the Ready light will
come on. If it reads Ready, take another picture.
Note: You can take the two pictures at the same time,
giving you two of the same pose, or you can take one
picture after another, giving you two different poses. To
set the number of photos to be taken at once, refer to
Chapter 4, LED display functions.
Advertisement
Table of Contents
