Preparation - Panasonic ES-LS8A Operating Instructions Manual

Rechargeable shaver
Hide thumbs Also See for ES-LS8A:
Table of Contents

Advertisement

Available languages

Available languages

 Outer foil section
 System outer foil
release buttons
 Trimmer
 Trimmer handle
B AC adaptor (RE7-87)
 Adaptor
 Power plug

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does
not fit the power outlet, use an
attachment plug adaptor of the
proper configuration.
3
Disconnect the adaptor
after charging is completed�
 Cord
 Appliance plug
Accessories
C Travel case
D Cleaning brush
E Oil
2
1
Note
You cannot operate the shaver while charging.
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
While charging
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
Notes
• When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C (50 °F – 95 °F). It may take longer to
charge, or the charge status lamp ( ) will blink
quickly and the battery may fail to charge properly in
extremely high or low temperatures.
After charging is
completed
"100%" appears and then
turns off after 5 seconds.
11

Advertisement

Table of Contents
loading

Table of Contents