Table of Contents
Advertisement
Available languages
Available languages
Tips for better usage
Apply the trimmer edge perpendicular to skin gently
and move downward slowly.
Trimming sideburns
►Switching the shaver head
You can change the pivot action.
"
"
The shaver head is moved to
prevent missed spots.
"
"
You can lock the shaver head.
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
14
Pre‑shave of long beards
1
Apply some hand soap and
some water to the system
outer foil�
2
Press
for more than
2 seconds to activate the
sonic vibration cleaning
mode�
• Splashing of foam is
suppressed.
• The lamps blink alternately.
• After about 20 seconds, it will be automatically
turned off, or you can turn it off by pressing the
power switch.
3
Remove the outer foil
section and clean with
running water�
• See page 16 for removing
the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
• After rinsing with water, shake the shaver up and
down for a few times to remove excess moisture and
then wipe off any drops of water with a dry cloth.
Advertisement
Chapters
Table of Contents
