Replacing The System Outer Foil - Panasonic ES-LS8A Operating Instructions Manual

4
Dry the outer foil
section, the shaver, and
the trimmer completely�
• Allow the shaver to dry in
the shade, avoid direct
sunlight.
5
Lubricate the shaver�
It will keep the movement of the
blades smooth and maintain a
comfort shave.
1. Apply one drop of oil to each
of the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately
five seconds.
4. Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
Notes
• Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, cracking or
discoloration of the parts.
Wipe with diluted soapy water.
Cleaning with the brush
Remove the outer foil section.
(See page 16.)
Clean the system outer foil in the areas
indicated by the circles every time you
use the shaver. Otherwise, abnormal
sound may be generated.
►Cleaning with the long brush
Clean the foil frame,
system outer foil, the
main body and the
trimmer using the long
brush.

Replacing the system outer foil

appears on the lamp display once every 18 months.
(Based on one 3‑minute shave use per day)
We recommend checking the system outer foil when it
appears.
Press the power switch for more than 30 seconds to
turn off .
Even if is not turned off right after the replacement, it
will automatically turn off within approximately 7 uses.
system outer foil once every 18 months
15