Contents; Safety Information; Specifications Chart - AquaScape 40040 Manual

Contents

No. Description
1. XT Enclosure
2. Control Panel
3. Treatment intake with low treatment alert
4. Low-voltage transformer
5. External Tubing
4

Safety Information

WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only.
PLEASE NOTE: Aquascape Smart Pond
Dosing System XT water treatments have
been specifically formulated to work with the
Aquascape Smart Pond Dosing System XT.
Using water treatments not designed for use with the
system may permanently damage the unit and void the
warranty.
WARNING: This product is weatherproof but is
not designed to be submersed in the water.
(A) Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use when
protected from direct sunlight, snow and rain. If
possible, locate so that the power cord will reach the
outlet without an extension cord.
Enclosure
Controller Wattage
Dimensions
10.2" x 8.5" x 13.6"
26 x 21.6 x 34.5 cm
aquascapeinc.com | CAN (866) 766-3426 |
☎
5
Smart Pond Dosing System XT Specs
Transformer Output
6W 12V AC/60 Hz
☎ US (866) 877-6637
1
(B) Inspect cords for damage before using.
(C) Do not use with extension cord.
(D) Any wiring of this product should be performed by a
qualified electrician to ensure code compliance and user
safety.
(E) To reduce risk of electrical shock, all wiring and
junction connections should be made per local codes.
Requirements may vary depending on usage and
location.
(F) The power cables should be protected at all times to
avoid punctures, nicks or abrasions.
(G) Never handle power cords with wet hands.
(H) Unplug system at receptacle outlet when not in use.
(I) Do not use power cable to lift the Smart Pond Dosing
System XT.
Transformer Low Voltage Cable
Wattage Length
12W 13 ft/3.96 m
2
3
External Tubing
Length
6 ft/1.8 m
3