4.11.1 Switch Configuration
Choose Switch Configuration from Misc Operation of Web Smart PoE Switch( please see the
Figure 4-59
appears and table 4-7 describes the Switch Configuration objects from Misc Operation of Web Smart PoE
Switch.
Object
Description
Provide Broadcast storm filter function and available options are Off. 1/2. MAC 1/4. 1/8.1/16.
Broadcast
Storm Filter
Default mode is Off; the screen in
Provide Collision Retry Forever function "Disable" or "Enable" on Web Smart PoE Switch; If this
Collision Retry
Forever
function is disabled, when a packet meet a collision, the Web Smart PoE Switch will retry 6 times
before discard the packets. Otherwise, the Web Smart PoE Switch will retry until the packet is
successfully sent. Default mode is Enable and the screen in
MAC Table
Provide MAC address table aging time setting on Web Smart PoE Switch; available options are
Auto-Aging
Disable. 150 sec. 300 sec. 600 sec. Default mode is 300 sec and the screen in
pears.
Provide MAC address table Hashing setting on Web Smart PoE Switch; available options are CRC
MAC Table
Hashing
Hash and Direct Map. Default mode is CRC Hash and the screen in
Web Auto Log-
Provide Web auto logout time setting on Web Smart PoE Switch; available options are 5 min. 10
out Time
min. 20 min. Default mode is 5 min and the screen in
Apply button
Press this button for save current Switch configuration on Web Smart PoE Switch.
Figure 4-59 Switch Configuration Web Page screen
Figure 4-59
Table 4-7 Descriptions of the Switch Configuration screen Objects
appears.
Figure 4-60
Figure 4-62
Figure 4-63
appears.
Figure 4-58)
, the screen in
appears.
Figure 4-61
ap-
appears.
- 47 -