Qos Configuration - Planet FGSW-2612PVS User Manual

4-7 QoS Configuration

This function provides QoS Configuration of Web Smart PoE Switch, the screen in
scribes the QoS Configuration objects of Web Smart PoE Switch.
Object Description
Provide different modes for QoS Configuration, the available options are shown as below:
QoS Mode
Disable QoS Priority,
High Empty Then Low,
Highest:secHigh:SecLow:Lowest=8:4:2:1
Highest:secHigh:SecLow:Lowest=15:7:3:1
Highest:secHigh:SecLow:Lowest=15:10:5:1
Default mode is Highest:secHigh:SecLow:Lowest=8:4:2:1, the screen in
pears.
Allow to assign Ingress priority on each port of Web Smart PoE Switch, the available options
Static Port Ingress
Priority
are OFF and 0-7. Default mode is 0 and the screen in
802.1p Priority [7-0] Allow assign high and low on each priority, the available options are shown as below:
Lowest, SecLow, SecHigh, Highest, the screen in
Apply button Press this button for save current QoS configuration of each port on Web Smart PoE Switch.
Figure 4-29 QoS Configuration Web Page screen
Table 4-4 Descriptions of the QoS Configuration screen Objects
Figure 4-29 appears and table 4-4 de-
Figure 4-30
Figure 4-31 appears.
Figure 4-32 appears.
ap-
- 29 -