Phoenix Contact TP 3070W/P User Manual
  1. Manuals
  2. Brands
  3. Phoenix Contact Manuals
  4. Touch Panel
  5. TP 3070W/P
  6. User manual

Phoenix Contact TP 3070W/P User Manual

Touch panels with capacitive glass touch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Touch Panels with
Capacitive Glass Touch
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP 3070W/P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Phoenix Contact TP 3070W/P

Summary of Contents for Phoenix Contact TP 3070W/P

  • Page 1 Touch Panels with Capacitive Glass Touch User manual...
  • Page 2 Touch Panels with Capacitive Glass Touch 2016-06-22 Designation: UM EN TP 3XXXX/P Revision: Order No.: — This user manual is valid for: Designation Order No. TP 3070W/P 2403459 TP 3090W/P 2403460 TP 3120W/P 2403461 TP 3156W/P 2403462 TP 3185W/P 2403862...
  • Page 3 The receipt of technical documentation (in particular user documentation) does not consti- tute any further duty on the part of Phoenix Contact to furnish information on modifications to products and/or technical documentation. You are responsible to verify the suitability and intended use of the products in your specific application, in particular with regard to observ- ing the applicable standards and regulations.
  • Page 4 TP 3XXXX/P PHOENIX CONTACT...

  • Page 5: Table Of Contents

    USB (X9, X10) ..................49 4.1.3 Memory Card ..................50 Maintenance and Servicing ......................51 Maintenance Interval ................... 51 Front Panel ......................51 Fuse ........................51 Battery ......................... 51 5.4.1 Changing the Battery ................52 5.4.2 Battery Disposal ................... 53 107460_en_00 PHOENIX CONTACT...
  • Page 6 TP 3XXXX/P Technical Data .........................55 General........................ 55 TP 3070W/P ......................57 TP 3090W/P ......................58 TP 3120W/P ......................59 TP 3156W/P ......................60 TP 3185W/P ......................61 PHOENIX CONTACT 107460_en_00...

  • Page 7: Important Notes

    The user manual, in particular the safety notes, must be observed by all personnel working with the device. – Observe the accident prevention rules and regulations that apply to the operating site. – Installation and operation must only be carried out by qualified and trained personnel. 107460_en_00 PHOENIX CONTACT...

  • Page 8: Intended Use

    Qualified electricians or persons instructed by them, who are familiar with applicable standards and other regulations regarding electrical engineering and, in particular, the relevant safety concepts. – Qualified application programmers and software engineers, who are familiar with the safety concepts of automation technology and applicable standards. PHOENIX CONTACT 107460_en_00...

  • Page 9: Installation And Commissioning

    1 mm to 6 mm (0.039" to 0.236") is permitted for proper mounting. Cut the mounting cutout in the housing for the device size to be installed. Push the device through the mounting cutout from the front. Figure 2-1 Mounting the device using a mounting bracket 107460_en_00 PHOENIX CONTACT...
  • Page 10 TP 3XXXX/P Fix the mounting brackets in the recesses provided (A). Pull the mounting brackets down until the snap into place (B). Secure the device using the threaded pins (C). PHOENIX CONTACT 107460_en_00...

  • Page 11: Front Panel Dimensions

    Installation and Commissioning 2.2.1 Front Panel Dimensions 2.2.1.1 TP 3070W/P Figure 2-2 Front panel (dimensions in mm) 107460_en_00 PHOENIX CONTACT...
  • Page 12 TP 3XXXX/P 2.2.1.2 TP 3090W/P Figure 2-3 Front panel (dimensions in mm) PHOENIX CONTACT 107460_en_00...
  • Page 13 Installation and Commissioning 2.2.1.3 TP 3120W/P Figure 2-4 Front panel (dimensions in mm) 107460_en_00 PHOENIX CONTACT...
  • Page 14 TP 3XXXX/P 2.2.1.4 TP 3156W/P Figure 2-5 Front panel (dimensions in mm) PHOENIX CONTACT 107460_en_00...
  • Page 15 Installation and Commissioning 2.2.1.5 TP 3185W/P Figure 2-6 Front panel (dimensions in mm) 107460_en_00 PHOENIX CONTACT...

  • Page 16: Mounting Cutout

    TP 3XXXX/P 2.2.2 Mounting Cutout 2.2.2.1 TP 3070W/P ±0,5 Figure 2-7 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 107460_en_00...
  • Page 17 Installation and Commissioning 2.2.2.2 TP 3090W/P ±0,5 Figure 2-8 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel 107460_en_00 PHOENIX CONTACT...
  • Page 18 TP 3XXXX/P 2.2.2.3 TP 3120W/P ±0,5 Figure 2-9 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 107460_en_00...
  • Page 19 Installation and Commissioning 2.2.2.4 TP 3156W/P ±0,5 Figure 2-10 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel 107460_en_00 PHOENIX CONTACT...
  • Page 20 TP 3XXXX/P 2.2.2.5 TP 3185W/P ±0,5 Figure 2-11 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 107460_en_00...

  • Page 21: Side View, Mounting Depth

    Installation and Commissioning 2.2.3 Side View, Mounting Depth 2.2.3.1 TP 3070W/P Figure 2-12 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 107460_en_00 PHOENIX CONTACT...
  • Page 22 TP 3XXXX/P 2.2.3.2 TP 3090W/P Figure 2-13 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel PHOENIX CONTACT 107460_en_00...
  • Page 23 Installation and Commissioning 2.2.3.3 TP 3120W/P Figure 2-14 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 107460_en_00 PHOENIX CONTACT...
  • Page 24 TP 3XXXX/P 2.2.3.4 TP 3156W/P Figure 2-15 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel PHOENIX CONTACT 107460_en_00...
  • Page 25 Installation and Commissioning 2.2.3.5 TP 3185W/P Figure 2-16 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 107460_en_00 PHOENIX CONTACT...

  • Page 26: Connecting The Device

    Fit the wires with wire end ferrules and connect the wires to the socket strip. Plug the socket strip onto pin strip X1. Secure the socket strip in place with a screw-type locking to prevent it from slipping out. PHOENIX CONTACT 107460_en_00...

  • Page 27: Grounding

    1.5 mm² (16 AWG) and must be kept as short as possible. Strip approx. 5 mm (0.197") off the wires. Fit the stripped wires with a slip-on sleeve. Plug the slip-on sleeve on the flat tab. Figure 2-18 Noiseless ground 107460_en_00 PHOENIX CONTACT...

  • Page 28: Switching On

    Internal \FlashDrv\ Save the file. Copy the file "starter.bat" with the FTP program or the Windows Explorer into the root directory of the operating device. Restart the operating device. Your application is started after the boot sequence. PHOENIX CONTACT 107460_en_00...
  • Page 29 Press the button to start the cockpit before the progress bar is down. You can customize the language of the cockpit interface with the Regional settings menu item. Press the button Regional Settings. Select the desired language. Confirm your selection with the green check. 107460_en_00 PHOENIX CONTACT...

  • Page 30: Menu Structure

    Current Users Add User Delete User File Manager Password Customizing Wallpaper Screensaver Splashscreen Administration Backup Create Backup Restore Backup Update Registry Save Registry Restore Default-Registry Extras Start Batch File Apply Admin.ini Information System Contact Figure 2-20 Menu structure PHOENIX CONTACT 107460_en_00...

  • Page 31: Settings And Functions

    Start OPC Resource Editor Press the Start OPC Resource Editor button. The OPC resource editor is started. Add new resources or edit the settings of an existing resource. Press the OK button. Confirm your selection with the green check. 107460_en_00 PHOENIX CONTACT...
  • Page 32 Device Name You can define a device name with a maximum of 15 characters. Via network, the device can be accessed with the device name instead of the ip address. Confirm your selection with the green check. PHOENIX CONTACT 107460_en_00...
  • Page 33 Fonts Use additional fonts The fonts in the default or user-specific directory will be installed automatically when you start the operating device. Depending on the number and size of fonts, the system start-up take correspondingly more time. 107460_en_00 PHOENIX CONTACT...
  • Page 34 Press the Delete button to delete the data from the USB stick or the device memory. 2.4.2.7 Password The category Password allows you to protect certain menu items in the cockpit with a pass- word. Current password Enter a password for the protected categories. Confirm your selection with the green check. PHOENIX CONTACT 107460_en_00...
  • Page 35 Confirm the dialog with the green check. Start update screensaver image You can apply the selected image as follows: Press the Start update screensaver image button. The successful update is confirmed with a dialog. Confirm the dialog with the green check. 107460_en_00 PHOENIX CONTACT...
  • Page 36 „Backup“ with data on the USB stick. If you confirm this dialog the backup is cancelled. The successful backup will be confirmed with a dialog. Restore backup NOTICE When restoring the backup all data in the flash memory of the operating device will be de- leted. PHOENIX CONTACT 107460_en_00...
  • Page 37 The update is carried out automatically. This might take several minutes. After the update process, a dialog will be displayed. Press the OK button to restart the operating device. Registry Save Registry The registry is saved completely. 107460_en_00 PHOENIX CONTACT...
  • Page 38 The activated parameters are confirmed with a dialog. Confirm this and the following dialogs with the OK button to complete the administra- tion. 10. Remove the USB stick and restart the operating device. Observe upper and lower case for all entries! PHOENIX CONTACT 107460_en_00...
  • Page 39 Data to the operating device – Contact Information System The following informations are displayed: – Device type – Article number – Serial number – Hardware / firmware version – Image version – Runtime version – OPCServer version 107460_en_00 PHOENIX CONTACT...
  • Page 40 Fonts directory \FlashDrv\Fonts Network Device name Compact IP address -> Use dynamic IP Enabled (DHCP) SNTP -> Server Ntp1.fau.de SNTP -> Interval (ms) 1209600000 PHOENIX CONTACT 107460_en_00...

  • Page 41: Visualization

    0 = Off 1 = On Table 2-4 GET_BRIGHTNESS_VALUE Description Determine the brightness of the display Return value 1 to 30 Table 2-5 GET_TEMPERATURE_VALUE Description Determine the temperature of the operating device Return value Temperature in °C 107460_en_00 PHOENIX CONTACT...
  • Page 42 Switch internal buzzer on / off Parameter 0 = Off 1 = On Table 2-11 SET_HORN_ON_OFF Description Switch internal buzzer on / off. If there is no external buzzer, the internal buzzer is automatically used. Parameter 0 = Off 1 = On PHOENIX CONTACT 107460_en_00...

  • Page 43: Identification

    The operating device can be identified using the nameplate on the rear of the device. Figure 2-21 Nameplate (example) Device type, article number Software version (at time of delivery) MAC address Voltage and power specification Serial number 107460_en_00 PHOENIX CONTACT...
  • Page 44 TP 3XXXX/P PHOENIX CONTACT 107460_en_00...

  • Page 45: Control And Display Elements

    If the display is damaged, avoid touching, swallowing or breathing in the liquids or gases which may leak out! Pixel failures, which can occur with TFT displays, are due to production and no complaint reason! The operating device is equipped with different displays (see technical data) depending on variant. 107460_en_00 PHOENIX CONTACT...
  • Page 46 TP 3XXXX/P PHOENIX CONTACT 107460_en_00...

  • Page 47: Interfaces Of The Device

    Female Connector X5 (Ethernet) Female Connector X9, X10 (USB Host - Type A) Slot for SD / SDHC Memory Card Connector X1 (Supply Voltage) Flat Push-on Connection for Noiseless Grounding - position varies dependent on the device type 107460_en_00 PHOENIX CONTACT...

  • Page 48: Ethernet (X5)

    Position of the ethernet diagnostics LEDs Table 4-2 Ethernet diagnostics LEDs Color State Designation Function Green ACT/LNK Connected Flashing Sending / receiving ethernet data telegram Yellow SPD 10/100 Operation in 100 MBit/s mode Operation in 10 MBit/s mode or disconnected PHOENIX CONTACT 107460_en_00...

  • Page 49: Usb (X9, X10)

    4.1.2.1 Cable For the specification of a suitable cable, please refer to the „Universal Serial Bus Specifi- cation Rev. 2.0“. NOTICE: Use industrial-suited USB cables with a length of maximally 2.5 m (8.202 feet). 107460_en_00 PHOENIX CONTACT...

  • Page 50: Memory Card

    4.1.3.2 Ejecting the memory card To remove, push the memory card into the operating device until it clicks. The memory card bounces when released automatically out of the operating device. Now you can remove the memory card. PHOENIX CONTACT 107460_en_00...

  • Page 51: Maintenance And Servicing

    20 seconds. The higher the ambient temperature, the longer the regeneration takes. Battery The minimum battery life is 5 years, even under unfavorable operating conditions. We recommend you change the battery approximately every 4 years as part of the regular maintenance work. 107460_en_00 PHOENIX CONTACT...

  • Page 52: Changing The Battery

    Batteries must only be changed by authorized and trained experts! NOTICE: Damage For changing the battery you may only use replacement batteries inclusive cover (Art.-No. 2401518) of Phoenix Contact. NOTICE: Damage Electrostatic discharge can damage electronic components. Observe the ESD protective...

  • Page 53: Battery Disposal

    NOTICE: Damage To prevent short circuitry in the collection boxes, insulate the poles of each battery with insulation tape or put each single battery into a plastic bag. 107460_en_00 PHOENIX CONTACT...
  • Page 54 TP 3XXXX/P PHOENIX CONTACT 107460_en_00...

  • Page 55: Technical Data

    SRAM Not available / 1 MByte (maximum) SD/SDHC interface 2 GByte / 32 GByte (maximum) Connection Method Female and male connector strip PHOENIX CONTACT MINI COMBICON, 3 pin RJ45 female connector USB female connector A Environmental Conditions Temperature during 0 °C to 50 °C (32 °F to 122 °F)
  • Page 56 NOTICE: Radio Interference This is a class A device. This device may cause radio interference in residential areas. In this case, the user may be required to introduce appropriate countermeasures, and to bear the cost of same. PHOENIX CONTACT 107460_en_00...

  • Page 57: Tp 3070W/P

    Technical Data TP 3070W/P Display Size (diagonal) in cm (inch) 17.78 (7) Type TFT (color) Resolution (pixels) 800 x 480 Colors 16.77 million Viewing angle (left / right / up / down) 70 / 70 / 60 / 60 in °...

  • Page 58: Tp 3090W/P

    169 x 261 (6.653 x 10.275) Mounting brackets Mounting depth in mm (Inch) - (stan- About 53 (2.086) dard / field bus) Degree of protection Front: IP65 Rear: IP20 Total weight About 1800 g Approvals CE, UL, cUL PHOENIX CONTACT 107460_en_00...

  • Page 59: Tp 3120W/P

    224 x 326 (8.818 x 12.834) Mounting brackets Mounting depth in mm (Inch) - (stan- About 53 (2.086) dard / field bus) Degree of protection Front: IP65 Rear: IP20 Total weight About 2700 g Approvals CE, UL, cUL 107460_en_00 PHOENIX CONTACT...

  • Page 60: Tp 3156W/P

    260 x 425 (10.236 x 16.732) Mounting brackets Mounting depth in mm (Inch) - (stan- About 53 (2.086) dard / field bus) Degree of protection Front: IP65 Rear: IP20 Total weight About 4000 g Approvals CE, UL, cUL PHOENIX CONTACT 107460_en_00...

  • Page 61: Tp 3185W/P

    Mounting cutout (H x W) in mm (Inch) 311 x 475 (12.244 x 18.7) Mounting brackets Mounting depth in mm (Inch) - (stan- About 53 (2.086) dard / field bus) Degree of protection Front: IP65 Rear: IP20 Total weight About 5600 g Approvals 107460_en_00 PHOENIX CONTACT...
  • Page 62 TP 3XXXX/P PHOENIX CONTACT 107460_en_00...
  • Page 63 File manager ............... 34 FTP ................34 Unpacking..............9 Functions ..............31 Fuse ................51 Identification..............43 Intended use ..............8 Interface Ethernet..............48 USB............... 49 Maintenance ............... 51 Maintenance interval........... 51 Memory card ............... 50 Mounting ............... 9 107460_en_00 PHOENIX CONTACT...
  • Page 64 TP 3XXXX/P PHOENIX CONTACT 107460_en_00...

This manual is also suitable for:

Tp 3090w/pTp 3120w/pTp 3156w/pTp 3185w/p24034592403460 ... Show all

Table of Contents