Phoenix Contact WP 4000 User Manual
  1. Manuals
  2. Brands
  3. Phoenix Contact Manuals
  4. Touch Panel
  5. WP 4000
  6. User manual

Phoenix Contact WP 4000 User Manual

Web panels with tft display
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Web Panels with TFT Display
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WP 4000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Phoenix Contact WP 4000

Summary of Contents for Phoenix Contact WP 4000

  • Page 1 Web Panels with TFT Display User manual...
  • Page 2 WP 4156W/P US 01 1104387 WP 4185W/P US 01 1104395 WP 4070-WXPS 1148693 WP 4070-WVRS 1148694 WP 4101-WXPS 1148687 WP 4120-WXPS 1148689 WP 4156-WHPS 1148691 WP 4185-WHPS 1148690 PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany phoenixcontact.com...
  • Page 3 The receipt of technical documentation (in particular user documentation) does not consti- tute any further duty on the part of Phoenix Contact to furnish information on modifications to products and/or technical documentation. You are responsible to verify the suitability and intended use of the products in your specific application, in particular with regard to observ- ing the applicable standards and regulations.
  • Page 4 PHOENIX CONTACT...

  • Page 5: Table Of Contents

    Status LEDs......................36 Interfaces of the Device ......................37 Standard Interfaces ..................... 37 4.1.1 Ethernet (X5) ..................38 4.1.2 USB (X9, X10) ..................39 4.1.3 Memory Card ..................40 Maintenance and Servicing ......................41 Front Panel ......................41 Fuse ........................41 108594_en_04 PHOENIX CONTACT...
  • Page 6 WP 4000 Technical Data .........................43 General........................ 43 7" Display (resistive) .................... 45 7" Display (PCAP) ....................47 10.1" Display (PCAP) ..................49 12.1" Display (PCAP) ..................51 15.6" Display (PCAP) ..................53 18.5" Display (PCAP) ..................55 PHOENIX CONTACT 108594_en_04...

  • Page 7: Important Notes

    The user manual, in particular the safety notes, must be observed by all personnel working with the device. – Observe the accident prevention rules and regulations that apply to the operating site. – Installation and operation must only be carried out by qualified and trained personnel. 108594_en_04 PHOENIX CONTACT...

  • Page 8: Security In The Network

    §§ 15 ff. AktG or German Stock Corporation Act (hereinafter collectively referred to as "Phoenix Contact") from all third-party claims that are made due to improper use. For the protection of networks for remote maintenance via VPN, Phoenix Contact offers the mGuard product series security appliances which you can find described in the latest Phoenix Contact catalog (phoenixcontact.net/products).

  • Page 9: Target Group

    Open-source software under the GNU General Public License, version 2. You may retrieve the source code for these software components from Phoenix Contact using an appropriate storage medium (CD or DVD-ROM), by contacting After Sales Service at the address below.
  • Page 10 WP 4000 PHOENIX CONTACT 108594_en_04...

  • Page 11: Installation And Commissioning

    Unpack all parts carefully and check the contents for any visible damage in transit. Also check whether the shipment matches the specifications on your delivery note. If you notice damages in transit or discrepancies, please contact us immediately. 108594_en_04 PHOENIX CONTACT...

  • Page 12: Mounting The Device

    WP 4000 Mounting the Device NOTICE: Damage When installing the device, leave a gap of at least 30 mm (1.181") around the device to ensure sufficient air circulation. NOTICE: Damage When the operating device is installed horizontally, please note that additional sources of heat beneath the operating device may result in heat accumulation.

  • Page 13: Front Panel Dimensions

    Installation and Commissioning 2.2.1 Front Panel Dimensions 2.2.1.1 7" Display (resistive) Figure 2-2 Front panel (dimensions in mm) 108594_en_04 PHOENIX CONTACT...
  • Page 14 WP 4000 2.2.1.2 7" Display (PCAP) 185,5 Figure 2-3 Front panel (dimensions in mm) PHOENIX CONTACT 108594_en_04...
  • Page 15 Installation and Commissioning 2.2.1.3 10.1" Display (PCAP) 262,7 Figure 2-4 Front panel (dimensions in mm) 108594_en_04 PHOENIX CONTACT...
  • Page 16 WP 4000 2.2.1.4 12.1" Display (PCAP) Figure 2-5 Front panel (dimensions in mm) PHOENIX CONTACT 108594_en_04...
  • Page 17 Installation and Commissioning 2.2.1.5 15.6" Display (PCAP) Figure 2-6 Front panel (dimensions in mm) 108594_en_04 PHOENIX CONTACT...
  • Page 18 WP 4000 2.2.1.6 18.5" Display (PCAP) Figure 2-7 Front panel (dimensions in mm) PHOENIX CONTACT 108594_en_04...

  • Page 19: Mounting Cutout

    Installation and Commissioning 2.2.2 Mounting Cutout 2.2.2.1 7" Display (resistive) ±0,5 Figure 2-8 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 20 WP 4000 2.2.2.2 7" Display (PCAP) 185,5 Figure 2-9 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 108594_en_04...
  • Page 21 Installation and Commissioning 2.2.2.3 10.1" Display (PCAP) 262,7 Figure 2-10 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 22 WP 4000 2.2.2.4 12.1" Display (PCAP) Figure 2-11 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 108594_en_04...
  • Page 23 Installation and Commissioning 2.2.2.5 15.6" Display (PCAP) ±0,5 Figure 2-12 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 24 WP 4000 2.2.2.6 18.5" Display (PCAP) ±0,5 Figure 2-13 Mounting cutout (dimensions in mm) Mounting Cutout Front Panel PHOENIX CONTACT 108594_en_04...

  • Page 25: Side View, Mounting Depth

    Installation and Commissioning 2.2.3 Side View, Mounting Depth 2.2.3.1 7" Display (resistive) Figure 2-14 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 26 WP 4000 2.2.3.2 7" Display (PCAP) Figure 2-15 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel PHOENIX CONTACT 108594_en_04...
  • Page 27 Installation and Commissioning 2.2.3.3 10.1" Display (PCAP) Figure 2-16 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 28 WP 4000 2.2.3.4 12.1" Display (PCAP) Figure 2-17 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel PHOENIX CONTACT 108594_en_04...
  • Page 29 Installation and Commissioning 2.2.3.5 15.6" Display (PCAP) Figure 2-18 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel 108594_en_04 PHOENIX CONTACT...
  • Page 30 WP 4000 2.2.3.6 18.5" Display (PCAP) Figure 2-19 Side view, mounting depth (dimensions in mm) Mounting Bracket Threaded Pin Mounting Surface Thickness 1 mm to 6 mm Circumferential Seal Front Panel PHOENIX CONTACT 108594_en_04...

  • Page 31: Connecting The Device

    Screw flange: 0.3 Nm (maximum) Use the following procedure to connect the device to the supply voltage: Strip approx. 30 mm (1.181") off the outer cable sheath and approx. 5 mm (0.197") off the wires. Figure 2-20 Preparing the cable 108594_en_04 PHOENIX CONTACT...

  • Page 32: Grounding

    WP 4000 Fit the wires with wire end ferrules and connect the wires to the socket strip. Plug the socket strip onto pin strip X1. Secure the socket strip in place with a screw-type locking to prevent it from slipping out.

  • Page 33: Switching On

    Type: WP 4000 1067721-00 1065546/P29/R34/M76/O00/D31 MAC 00-AA-00-00-00-00 24 V In: 0.4 A SNR: 201800000000 PHOENIX CONTACT GmbH & Co. KG Flachsmarktstraße 8, 32825 Blomberg, Germany Figure 2-22 Nameplate (example) Article Number, Device Type Version Software (at time of delivery) Orderkey...
  • Page 34 WP 4000 Table 2-2 Orderkey Option Configuration Processor ARM Cortex-A53, 4x 1.2 GHz Processor ARM Cortex-A53, 4x 1.2 GHz TPM Main memory 1 GB LPDDR3 Master storage 8 GB eMMC Flash Options No options PHOENIX CONTACT 108594_en_04...

  • Page 35: Control And Display Elements

    If the display is damaged, avoid touching, swallowing or breathing in the liquids or gases which may leak out! Pixel failures, which can occur with TFT displays, are due to production and no complaint reason! The operating device is equipped with different displays (see technical data) depending on variant. 108594_en_04 PHOENIX CONTACT...

  • Page 36: Status Leds

    WP 4000 Status LEDs Next to the slot for the microSD / microSDHC memory card there are status LEDs. Figure 3-1 Position of the status LEDs The status LEDs have the following functions: Table 3-1 Status LEDs Color State Designation...

  • Page 37: Interfaces Of The Device

    Female Connector X5 (Ethernet) Female Connector X9, X10 (USB Host - Type A) Status LED LD1 (Heartbeat) Status LED LD2 (Power) Slot for microSD- / microSDHC Memory Card Connector X1 (Supply Voltage) Flat Push-on Connection for Noiseless Grounding 108594_en_04 PHOENIX CONTACT...

  • Page 38: Ethernet (X5)

    WP 4000 4.1.1 Ethernet (X5) A 10/100Base-T Ethernet interface is located at the operating device. 4.1.1.1 Pin Assignment Connector in the operating device: RJ45 female connector. Table 4-1 Assignment of the Ethernet interface Designation Function Transmitted Data, Positive Polarity Transmitted Data, Negative Polarity Received Data, Positive Polarity n.c.

  • Page 39: Usb (X9, X10)

    4.1.2.1 Cable For the specification of a suitable cable, please refer to the „Universal Serial Bus Specifi- cation“. NOTICE: Use industrial-suited USB cables with a length of maximally 2.5 m (8.202 feet). 108594_en_04 PHOENIX CONTACT...

  • Page 40: Memory Card

    WP 4000 4.1.3 Memory Card At the underside of the operating device you can plug in an microSD / microSDHC card. NOTICE: Using hardware not suitable for industrial use (for example keyboard, mouse, memory card) in industrial environments may decrease safety of operation. This includes hard- ware intended for home and office use.

  • Page 41: Maintenance And Servicing

    At an ambient temperature of 20 °C (68 °F), the regeneration takes approximately 20 seconds. The higher the ambient temperature, the longer the regeneration takes. 108594_en_04 PHOENIX CONTACT...
  • Page 42 WP 4000 PHOENIX CONTACT 108594_en_04...

  • Page 43: Technical Data

    After a maximum charge, the real-time clock can be buffered approximately 10 days. Memory 1 GByte LPDDR3 Mass storage 8 GByte eMMC microSD/microSDHC interface 2 GByte / 32 GByte maximum Connection System Male connector strip Phoenix MINI-COMBICON, 3 pin (Art.-No. 1847068) RJ45 male connector USB male connector type A 108594_en_04 PHOENIX CONTACT...
  • Page 44 WP 4000 Standards and Guidelines Interference immunity EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-6-2 Emitted interference EN 55011 limit value class A EN 55032 limit value class A EN 61000-6-4 Equipment requirements EN 61131-2 Storage and...

  • Page 45: 7" Display (Resistive)

    UL 1310 or Limited Power Source (LPS) in accordance with EN 60950-1 / IEC 60950-1) Residual ripple 10 % maximum Minimum voltage 18 V Maximum voltage 30 V Power consumption (typical at 24 V) 0.4 A Connected load 9.6 W Fuse Semiconductor fuse, self-resetting Protection against Integrated polarity reversal 108594_en_04 PHOENIX CONTACT...
  • Page 46 WP 4000 Front Panel and Enclosure Enclosure Steel sheet, galvanized Front panel material Aluminium, brushed, anodized natural finish Front panel (H x W x D) in mm (Inch) 147 x 203 x 5 (5.787 x 7.992 x 0.197) Seal Circumferential rubber seal on the rear Mounting cutout (H x W) in mm (Inch) 139 x 195 (5.7472 x 7.677)

  • Page 47: 7" Display (Pcap)

    Front panel (H x W x D) in mm (Inch) 146.2 x 185.5 x 6 (5.755 x 7.303 x 0.236) Seal Flat gasket on the rear Mounting cutout (H x W) in mm (Inch) 136 x 175 (5.354 x 6.889) 108594_en_04 PHOENIX CONTACT...
  • Page 48 WP 4000 Front Panel and Enclosure Mounting brackets Mounting depth in mm (Inch) About 45 (1.771) Degree of protection Front: IP65 / NEMA Enclosure Type 4 (indoor use only) Rear: IP20 Total weight About 760 g Approvals CE approval UL approval...

  • Page 49: Display (Pcap)

    Front panel (H x W x D) in mm (Inch) 199.3 x 262.7 x 6 (7.846 x 10.342 x 0.236) Seal Flat gasket on the rear Mounting cutout (H x W) in mm (Inch) 189 x 252 (7.44 x 9.921) 108594_en_04 PHOENIX CONTACT...
  • Page 50 WP 4000 Front Panel and Enclosure Mounting brackets Mounting depth in mm (Inch) About 45 (1.771) Degree of protection Front: IP65 / NEMA Enclosure Type 4 (indoor use only) Rear: IP20 Total weight About 1270 g Approvals CE approval UL approval...

  • Page 51: Display (Pcap)

    Front panel (H x W x D) in mm (Inch) 229 x 302 x 6 (9.015 x 11.889 x 0.236) Seal Flat gasket on the rear Mounting cutout (H x W) in mm (Inch) 219 x 292 (8.622 x 11.496) 108594_en_04 PHOENIX CONTACT...
  • Page 52 WP 4000 Front Panel and Enclosure Mounting brackets Mounting depth in mm (Inch) About 45 (1.771) Degree of protection Front: IP65 / NEMA Enclosure Type 4 (indoor use only) Rear: IP20 Total weight About 1650 g Approvals CE approval UL approval...

  • Page 53: Display (Pcap)

    Front panel (H x W x D) in mm (Inch) 278 x 436 x 6 (10.944 x 17.165 x 0.236) Seal Flat gasket on the rear Mounting cutout (H x W) in mm (Inch) 260 x 425 (10.236 x 16.732) 108594_en_04 PHOENIX CONTACT...
  • Page 54 WP 4000 Front Panel and Enclosure Mounting brackets Mounting depth in mm (Inch) About 53 (2.086) Degree of protection Front: IP65 / NEMA Enclosure Type 1 (indoor use only) Rear: IP20 Total weight About 4000 g Approvals CE approval UL approval...

  • Page 55: Display (Pcap)

    Front Panel and Enclosure Enclosure Steel sheet, galvanized Front panel material Aluminium, brushed, anodized natural finish Front panel (H x W x D) in mm (Inch) 329 x 485 x 8 (12.952 x 19.094 x 0.314) 108594_en_04 PHOENIX CONTACT...
  • Page 56 WP 4000 Front Panel and Enclosure Seal Flat gasket on the rear Mounting cutout (H x W) in mm (Inch) 311 x 475 (12.244 x 18.7) Mounting brackets Mounting depth in mm (Inch) - (stan- About 53 (2.086) dard / field bus)
  • Page 57 15.6" Display (PCAP) ..........23 15,6" Display (PCAP) ..........53 18.5" Display (PCAP) ..........24 18.5" Display (PCAP) ..........55 7" Display (PCAP) ..........20 7" Display (PCAP) ..........47 7" Display (resistive)..........19 7" Display (resistive)..........45 108594_en_04 PHOENIX CONTACT...
  • Page 58 WP 4000 Touchscreen ............... 35 Unpacking..............11 Version................ 33 PHOENIX CONTACT 108594_en_04...

This manual is also suitable for:

Wp 4070w/p us 01Wp 4101w/p us 01Wp 4156w/p us 01Wp 4185w/p us 01Wp 4070-wxpsWp 4070-wvrs ... Show all

Table of Contents