Installation Of The Machine; Unpacking And Releasing Machine - Bompani BOCA814E Instruction Book

16
UNPACKING AND UNBLOCKING THE MACHINE
The machine must be installed by qualified personnel following the manufacturer's
instructions. Incorrect installation can lead to injuries for persons and damage to
objects.
When deciding where to install the washing machine, consider the following advice:
The room must have a water and electrical system. (Remember that cables
▼
and hoses at the back of the washing machine must not be crushed).
The washing machine must be placed on a flat and solid surface.
▼
Do not install the machine in a room where the temperature could go below
▼
3°C.
Place the machine in the chosen location and remove external packaging (fig.
▼
2).
Lift the washing machine and remove the polystyrene base and the plastic
▼
spacer (fig. 3).
For transportation, the machine's oscillating parts are
blocked by two spacers with screws.
Remove these spacers and screws before starting the
machine.
Preserve them for any future moves.
Close the holes with the caps provided inside of the document bag.
Incline the washing machine and extract the two internal polystyrene corner
▼
pieces (if present) by pulling the two cardboard strips, first E and then F (fig.5).
Remove the polystyrene spacer (fig. 6).
▼
EN
INSTALLING THE MACHINE
2
3
4
E
F
5
6
SM3012