5.1 Continuous operating
•
Place speed control knob at the lowest position. Put the instrument on a stable and safe place and plug in the main
power.
•
Push the two-direction switch left to ON and power LED is lit.
•
Turn the speed control knob to set speed.
•
Push the two-direction switch right gently to turn OFF.
5.2 Touch operating
•
Place the speed control knob at the lowest position. Put the instrument on a stable and safe place and plug in the
main power.
•
Push the two-direction switch right to the touch mode.
•
Turn the speed control knob to set speed.
•
If a test tube is pressed into the mixing head vertically, the instrument will begin to work and the power LED will be
lit.
•
Push the two-direction switch left gently to OFF.
6. Maintenance and Cleaning
•
Proper maintenance can keep instrument working and extend its life time.
•
Do not spray the cleanser into the instrument when cleaning.
•
Unplug the power line when cleaning.
•
Only use cleanser as shown below:
Figure 3
Figure 4
Note:
• Place vessels as vertical as possible into the
center of mixing head for proper mixing.
• Adjust the speed control knob slowly in order
to have the instrument works smoothly.
• Don not run continuous operating mode at high
speed area.
Dyes
Construction materials
Cosmetics
Foodstuffs
Fuels
Table 2
Isopropyl alcohol
Water containing tenside
/ Isopropyl alcohol
Water containing tenside
/ Isopropyl alcohol
Water containing tenside
Water containing tenside
5