Seiko Astron 5X53 Complete User Manual page 45

7
TROUBLESHOOTING
How to manually set the time
• When using the watch again under a condition in which the watch is able to receive GPS signals,
receive GPS signals to set the time.
• When adjusting the time, the date will also be adjusted.
1
Pull out the crown to the second
click
The seconds hand moves to display the sub-dial of the
currently set time zone.
0 1 2
Pull out
the crown to
the second
click
* Even if GPS signals cannot be received, the watch can be used with the same accuracy as a normal quartz watch. (at loss/gain ±15 seconds per month on average)
* If the watch receives GPS signals after manual time setting, it displays the received time.
2 Continue to press Button B (6 seconds)
until the seconds hand moves to the 0
position, and then release it
* Although the seconds hand moves to the 36 seconds
position after pressing Button B for 3 seconds,
continue to press it.
The seconds hand moves to stop at the 0-second
position.
The watch enters the manual time setting mode.
0 1 2
Press for
6 seconds
* When the watch enters the manual time setting
mode, the reception result will be displayed as "N",
since the reception results data will be lost.
ASTRON 5X53 GPS SOLAR
3
Turn the crown to set the time
Turn the crown clockwise to
advance the time.
Turn quickly to move
continuously.
Turn again to stop
moving.
Turn the crown
counterclockwise to set back
the time.
* When it has moved continuously for 12 hours, it will
stop.
Turn the crown to continue setting.
* The point in which the date changes is at 0:00 AM
(12:00 PM). Set the time taking into consideration
AM or PM.
44
4
Push the crown back in
(simultaneously with a time signal)
Operation has been completed.
The watch resumes its normal movement.
0 1 2
Push
back in
* Also the sub-dial is corrected in accordance with the
corrected time at this time.