Seiko Astron 5X53 Complete User Manual page 33

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
Check whether leap second data reception was successful
The reception result (success or failure) of the regular leap second data reception is displayed for 5 seconds.
1
Press Button A once and then
release it
The seconds hand and indicator hand display the
reception result.
Press
and then
release
* When Button A is kept pressed, the watch enters the
Manual time adjustment operation.
2
The result of the reception is
displayed
The seconds hand displays the result of the GPS signal
reception (time adjustment or time zone adjustment).
The indicator hand points to "1" or "4+" which shows
"time adjustment" or "time zone adjustment."
* The indicator hand points to "4+" as a result of time
zone adjustment.
Seconds hand: Reception result (success/failure)
Result Successful Failed
Display
N 52-second
Position Y 8-second position
position
* After 5 seconds have elapsed or when Button B is
pressed, the watch returns to the time display mode.
ASTRON 5X53 GPS SOLAR
3
Press Button A and then release it while the result of the reception is displayed (for
5 seconds) in step 2
The seconds hand displays the result of the leap
second data reception (successful / failed).
The indicator hand displays "LEAP SEC." of the leap
second data reception.
Seconds hand
Press
and then
release
Seconds hand: Reception result (success/failure)
Result Successful Failed
Display
N 52-second
Position Y 8-second position
position
* When Button A is kept pressed, the watch enters the
Manual time adjustment operation.
* After 5 seconds have elapsed or when Button B is
pressed, the watch returns to the time display mode.
32
When the leap second data
reception result is Y (successful)
• The leap second data reception was successful.
Use the watch as it is.
When the leap second data
reception result is N (failed)
• The leap second data reception, periodically
performed, has not been successful.
It will be performed automatically with the next GPS
signal reception (automatic time adjustment,
manual time adjustment or time zone adjustment).
Use the watch as it is.
* The leap second data is received on or after
December 1st and June 1st.
* Even when the leap second data reception has not
been successful, the time is correct until the leap
second data is added (deleted).
Move to the outdoors where GPS signals can be easily
received as necessary to receive GPS signals.
→ Place where GPS signals can be easily received/
Place where GPS signals cannot be received P. 16