Planar PL2010MW User Manual page 10

Expansion Mode
H. Position
V. Position
Pixel Clock
Phase
9300K
7500K
5000K
sRGB
User Preset
Volume
Input Select
720/640x400@70hz
1360/1280/1024x768@60hz
Resolution
Select
1600x900/1280x960@60hz
1680/1400x1050@60hz
DDCCI
H. Position
V. Position
OSD Time
Language
Recall
Information
FULL Selects wide format for display.
ASPECT Selects 4:3 format for display.
Adjusts the horizontal position.
(available in analog mode only)
Adjusts the vertical position.
(available in analog mode only)
Adjusts picture Clock.
(available in analog mode only)
Adjusts picture Focus.
(available in analog mode only)
Sets the color temperature to 9300K.
Sets the color temperature to 7500K.
Sets the color temperature to 5000K.
Sets the color temperature to sRGB.
R/G/B Allows users to adjust red/green/blue intensity.
Adjusts the volume of audio
D-SUB
Selects input signal to analog (D-Sub)
DVI
Selects input signal to digital (DVI)
Selects the resolution of choice.
ON/OFF Turns ON/OFF DDC/CI support
Adjusts the horizontal position of the OSD.
Adjusts the vertical position of the OSD.
Adjusts the OSD timeout.
Multi-language selection.
Clear color status and return parameters to
Recall Color
factory preset values.
Clear each old status and return all adjusted
Recall All
parameters to factory preset values.
Shows the resolution, H/V frequency and input
port of current input timing.
9