Controls And Displays; Front Panel - Pioneer VSX 920 Operating Instructions Manual

Controls and displays

Chapter 2:
Controls and displays

Front panel

1 2 3
STANDBY/ON
INPUT
SELECTOR
 STANDBY/ON
1
2 INPUT SELECTOR dial
Selects an input source.
3 MCACC indicator
Lights when Acoustic Calibration EQ (page 39)
is on (Acoustic Calibration EQ is automatically
set to on after the Auto MCACC Setup
(page 31)).
4 Remote sensor
Receives the signals from the remote control
(see Operating range of remote control on
page 10).
5 SPEAKERS
See Switching the speaker terminal on
page 20.
DIMMER
Dims or brightens the display. The
brightness can be controlled in four steps.
Note
1 The Speaker System setting may or may not be displayed, depending on the input source you have selected.
4 5
PHASE
CONTROL
SPEAKERS DIMMER DISPLAY BAND
PHONES LISTENING MODE
AUTO/DIRECT STEREO/ALC STANDARD ADV SURROUND
9 10
6 7
TUNE TUNER EDIT PRESET
VIDEO INPUT
iPod iPhone
DIRECT CONTROL
iPod
iPhone
USB
VIDEO L AUDIO
11 12 13
DISPLAY
Switches the display of this unit. The
listening mode, sound volume, Speaker
System setting or input name can be
checked by selecting an input source.
6 Character display
See Display on page 11.
7 Tuner control buttons
BAND
Switches between AM, FM ST (stereo) and
FM MONO radio bands (page 52).
TUNE /
Used to find radio frequencies (page 52)
and SIRIUS Radio channels (page 70).
TUNER EDIT
Use with TUNE /, PRESET / and
ENTER to memorize and name stations for
recall (page 52, 53). Used to preset the
channel in SIRIUS Radio (page 70).
VSX-920
AUDIO/ VIDEO MULTI- CHANNEL RECEIVER
ENTER
MASTER
VOLUME
MCACC
R SETUP MIC
14
02
8
1
9
En