Controls And Displays; Front Panel - Pioneer VSX-5231 Operating Instructions Manual

Chapter
1
1

Controls and displays

Front panel

1 2 3
10 11 12
1
INPUT SELECTOR dial
Selects an input source (page 21).
2
MCACC indicator
Lights when Acoustic Calibration EQ (page
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 19)).
3
Receiver control buttons
– Use to change the speaker system on or off.
SPEAKERS
When the SP OFF is selected, no sound is output from the
speakers connected to this receiver.
– Dims or brightens the display. The brightness
DIMMER
can be controlled in four steps.
– Switches the display of this unit. The listening
DISPLAY
mode, sound volume, input name can be checked by
selecting an input source.
4
Character display
See Display on page 7.
5
Tuner control buttons
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 25).
4 5 6 7 8
13 14 15
– Use with
TUNER EDIT
to memorize and name stations for recall
ENTER
(page 25).
TUNE / – Used to find radio frequencies
27) is on (Acoustic
PRESET /
(page 25).
6
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected
7
iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB
input is selected (page
8
Remote sensor
Receives the signals from the remote control (see
range of remote control on page
9
MASTER VOLUME
10
STANDBY/ON
9
17
23
16
/, PRESET / and
TUNE
(page 25).
– Use to select preset radio stations
(page 14).
23).
Operating
9).
dial
6
18 19 20
24 25 26
11
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode.
12
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 19).
13
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
Auto surround mode (page 26) and Stream Direct
playback (page 27).
– Press for standard decoding
ALC/STANDARD SURR
and to switch between the modes of 2 Pro Logic and
NEO:6, and the Auto level control stereo mode
– Switches between the various
ADVANCED SURROUND
surround modes (page 27).
14
ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned ON, the display will go dark
4
6
21 19 22
34
27 27 28
– Switches between
(page 26).
(page 27).