Controls And Displays; Front Panel - Pioneer VSX-532 Operating Instructions Manual

1

Controls and displays

Front panel

1 2
8 9 10
1 INPUT SELECTOR
dial
Selects an input source (page 18).
2
Receiver control buttons
SPEAKERS
– Use to change the speaker system on or
off. When the SP OFF is selected, no sound is output
from the speakers connected to this receiver.
DIMMER
– Dims or brightens the display. The brightness
can be controlled in four steps.
STATUS
– Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
3
Character display
See Display on page 5.
4
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 22).
TUNER EDIT TUNE
– Use with /,
ENTER
and to memorize and name stations for recall
(page 22).
TUNE /
– Used to find radio frequencies
3 4 5 6
11 12 13
PRESET /
(page 23).
5
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected
6
Remote sensor
Receives the signals from the remote control (see
range of remote control on page
7 MASTER VOLUME
8
ÍSTANDBY/ON
9
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode.
10
PRESET / AUX INPUT jack
Use to connect other equipment with a stereo mini jack.
Use to connect a microphone when performing Full Auto
MCACC setup (page
(page 22).
7
VSX-532
14
– Use to select preset radio stations
(page 12).
Operating
7).
dial
/SETUP MIC jack
16).
4
11
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
between Auto surround mode (page
Direct playback (page 25).
ALC/STANDARD SURR
– Press for standard decoding
and to switch between the modes of
NEO:6, and the Auto level control stereo mode
ADVANCED SURROUND
– Switches between the
various surround modes (page 25).
12
ECO
Switches between ECO 1/ECO 2. When ECO Mode is turned
ON, the display will go dark (page 25).
13
SOUND RETRIEVER
Turn Advanced Sound Retriever effect on/off.
14
USB terminal
Use to connect your USB mass storage device as an audio
source (page 15).
2
4
33
– Switches
24) and Stream
Pro Logic and
(page 24).