Connecting Your Dvd Player With No Hdmi Output - Pioneer VSX 920 Operating Instructions Manual

Connecting your equipment

Connecting your DVD player with no HDMI output

This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback
component with no HDMI output) to the receiver.
HDMI IN
TV
Note
1 If the connection was made using an optical cable, you'll need to tell the receiver which digital input you connected the TV to
(see Choosing the input signal on page 43).
2 If the connection was made using an optical or a coaxial cable, you'll need to tell the receiver which digital input you connected
the DVD player to (see Choosing the input signal on page 43).
3 If your player also has a component video output, you can connect this too. See Using the component video jacks on page 28
for more on this.
IN BD
CD-R/TAPE DVR/VCR
DVD
L
OUT
R
TV/SAT
CD-R/TAPE DVR/VCR
L
IN
COAXIAL ASSIGNABLE
DVR/VCR
IN 1
R
( CD )
TV/SAT DVD
OPTICAL
IN 2 L
OUT
IN
IN 1
R
( CD-R/TAPE )
ASSIGNABLE
HDMI 1 2 AUDIO
1
R L
OPTICAL
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
Select one
This connection is
required in order to
listen to the sound of
the TV over the receiver.
123
ADAPTER PORT
( OUTPUT 5 V 100 mA MAX )
SUBWOOFER
VIDEO
PRE OUT DVR/VCR
OUT IN
CD
IN MONITOR OUT DVD IN
P P
ANTENNA R B
FM
BD
UNBAL
75
SIRIUS
IN
IN
AM
LOOP
COMPONENT VIDEO
OPTICAL
R L
DIGITAL AUDIO OUT
ANALOG AUDIO OUT
Select one
DVD player
SPEAKERS A
FRONT CENTER
R L
TV/SAT
IN
Class 2 Wiring
BD IN
Y
MONITOR FRONT HEIGHT /
MONITOR
B
OUT OUT SPEAKERS
R L
IN 2
( DVD )
IN 1
( BD )
ASSIGNABLE
1 2
2
3
COAXIAL
VIDEO OUT
03
25
En