Table of Contents
Advertisement
On-board help
Set-up
Mount the laser and the sensor on either side of the coupling, ensuring that they are
l
aligned exactly with the 0 or reference mark.
Switch the touch device on, then tap
l
ment application.
Configure the machines as appropriate by tapping the machines and coupling to select
l
the desired machine type or coupling from the respective carousel.
Enter the following required machine dimensions:
l
(1)
Sensor to coupling center
l
(2)
Coupling center to flange
l
(3)
Coupling diameter
l
(4)
RPM
l
When entering machine dimensions, the flange geometry must be taken into account.
l
Tap the flange-mounted machine.
The menu items on the screen may be used to edit machine name, access the "Flange
details" screen, change the flange position with respect to the shaft, flip the machine
along the shaft axis (toggle) and edit machine color.
108
in the home screen to start the vertical align-
Version:2.3
Advertisement
Table of Contents
