Table of Contents
Advertisement
On-board help
After taking a measurement point, the displayed laser and sensor move to the next
clock position on the display.
If shaft rotation restrictions hinder the taking of measurements at particular shaft pos-
itions, bypass these using
Measurements must be taken in at least three positions over 90°, but more measurements
over a wider angle is recommended.
(1)
Rotational arc showing rotational angle covered by the shafts during measurement.
l
The arc changes colour from red [< 60°] -> amber -> green [> 70°]
(2)
Rotational angle completed by the shafts for current measurement
l
(3)
Number of measurement points taken for current measurement
l
(4)
Measurement quality
l
(5)
'Proceed' icon – tap to continue to view measurement results
l
54
or
.
for current measurement
Version:2.3
Advertisement
Table of Contents
