Table of Contents
Advertisement
Technical data – sensALIGN 5 EX laser
sensALIGN 5 EX laser
Type
Power supply
Environmental
protection
Temperature
range
Dimensions
Weight
Wavelength
Safety class
Safety pre-
cautions
Beam power
Beam divergence
CE conformity
Intrinsic safety
ROTALIGN touch EX
Semiconductor laser
Batteries 2 x 1.5 V IEC LR6 ("AA")
Only use Duracell Industrial ID 1500 or Energizer E91
Operating time: 120 hours
IP 65 (dustproof and water jets resistant), shockproof
Relative humidity: 10% to 90%
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Approx. 105 x 74 x 47 mm (4 9/64" x 2 29/32" x 1 27/32")
Approx. 225 g (7.9 oz)
630 – 680 nm (red, visible)
Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and 1040.11 except for devi-
ations pursuant to Laser Notice No. 50, dated June 24, 2007.
Do not look into laser beam
< 1mW
0.3 mrad
Refer to the CE compliance certificate in www.pruftechnik.com
II 2G Ex ib op is IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075; IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
On-board help
165
Advertisement
Table of Contents
