Function And Control; Remote Controller Introduction (Yap1F7(Wifi)) - Gree GWH09AGA-K6DNA1A/I Service Manual

6. Function and Control

6.1 Remote Controller Introduction (YAP1F7(WiFi))

Notice:
This is a general use remote controller. It could be used for the air conditioner with multifunction. For the functions which the model
doesn't have, if press the corresponding button on the remote controller, the unit will keep the original running status.
After putting through the power, the air conditioner will give out a sound. Operation indicator " " is ON. After that, you can operate
the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
and the air conditioner will give out a "di" sound, which means the signal has been sent to the air conditioner.
ON/OFF
MODE
I FEEL
LIGHT
Introduction for icons on display screen
8
Scavenging function
Temp.
display type
TIMER ON / TIMER OFF
30
T-ON T-OFF
TEMP CLOCK
WiFi SLEEP
I feel
Set fan speed
Turbo mode
Send signal
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Sleep mode
heating function
Health mode
Quiet
X-FAN function
Set temp.
Indoor ambient
temp.
Outdoor ambient
temp.
Clock
Set temperature
WiFi function
Set time
Left & right swing
Up & down swing
Child lock
" on the display of remote controller will blink once
ON/OFF
Press this button to turn on the unit. Press this button again
to turn off the unit.
MODE
MODE
Press this button to select your required operation mode.
AUTO COOLD RY
When selecting auto mode, air conditioner will operate
automatically according to ex-factory setting. Press "FAN"
button can adjust fan speed. Press " " / "
adjust fan blowing angle.
After selecting cool mode, air conditioner will operate under
cool mode. Cool indicator "
indicator is not available for some models.) Press "▲" or
" ▼ "button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press "
blowing angle.
When selecting dry mode, the air conditioner operates
at low speed under dry mode. Dry indicator "
unit is ON. (This indicator is not available for some models.)
Under dry mode, fan speed can't be adjusted. Press "
" "button to adjust fan blowing angle.
When selecting fan mode, the air conditioner will only blow
fan, no cooling and no heating. All indicators are OFF. Press
"FAN" button to adjust fan speed. Press "
adjust fan blowing angle.
When selecting heating mode, the air conditioner operates
under heat mode. Heat indicator "
(This indicator is not available for some models.) Press "▲"
or " ▼ " button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press "
blowing angle. (Cooling only unit won't receive heating mode
signal. If setting heat mode with remote controller, press ON/
OFF button can't start up the unit).
Notice:
For preventing cold air, after starting up heat mode, indoor
unit will delay 1~5 minutes to blow air (actual delay time
depends on indoor ambient temperature).
Service Manual
FAN HEAT
" button can
" on indoor unit is ON. (This
" / " " button to adjust fan
" on indoor
" /
" / " " button to
" on indoor unit is ON.
" / " " button to adjust fan
Technical Information