Advertisement
NWPS-254 Filter Holder for PM4 Personal Dust Sampler
Before Use
This product is a PM4 filter holder with 2.5 L/min aspiration rate. Do not use it for any applications
△
not indicated in this manual.
△
This is precision manufactured product. Handle it very carefully. In particular, performance may
deteriorate significantly if the aspiration port is scratched or otherwise damaged.
△
This product is assembled from a large number of parts. Therefore, handle it with particular care.
[Modifications and Repairs Are Prohibited] Never disassemble or modify this product, as doing
△
so will void the warranty with Sibata. Doing so may also result in an unforeseen fault or accident.
■
Overview
This product is a PM4 filter holder with 2.5 L/min aspiration rate. By installing a suction pump in this
product, at an aspiration rate of 2.5 L/min, dust can be collected with the property PM4 (for removing
50 % of 4 μm particles).
■
Specifications and Component Parts
Item Code
Model
Aspiration Rate
Temperature Range
Particle Separation Classification
Filters
Accessories
This product is configured with the following parts.
①
Nozzle cover
⑤
PTFE gasket
⑦
O-ring
*1 PTFE binder filter (sold separately)
Operation Manual
PM4 (for removing 50 % of 4 μm particles)
25 mm dia. metal collection plate (stainless steel) to capture
over 50 % of 4 μm particles and particles more than 4 μm
25 mm dia. PTFE binder filter to capture remaining 4 μm
particles and particles less than 4 μm
Connector Tubing 7 mm I.D., 10 mm O.D., 1m
*1
Fig. 1 Holder Assembly Sequence
②
③
Nozzle
Metal collection plate
⑥
Metallic mesh, filter base, tube connector
⑧
Holder base
CODE 080150-254
080150-254
NWPS-254
2.5 L/min
0 to 40 °C
Grease guide,
④
Spacer
Advertisement
Table of Contents
Related Manuals for Sibata NWPS-254
Summary of Contents for Sibata NWPS-254
- Page 1 This product is assembled from a large number of parts. Therefore, handle it with particular care. [Modifications and Repairs Are Prohibited] Never disassemble or modify this product, as doing △ so will void the warranty with Sibata. Doing so may also result in an unforeseen fault or accident. ■ Overview This product is a PM4 filter holder with 2.5 L/min aspiration rate.
- Page 2 Fig. 3 Fig. 4 ●The grease recommended by Sibata (080150-011 and 080150-012) is a mixture of two types. They can separate during storage, so mix well before use. (4) Place the grease guide on top of the metal collection plate as shown in Fig. 3, and place the grease substantially in the center.
Need help?
Do you have a question about the NWPS-254 and is the answer not in the manual?
Questions and answers