Cable The Shelves - Lenovo ThinkSystem DE Series Manual

Risk of equipment damage — Stop pushing the drawer if you feel binding. Use

the release levers at the front of the drawer to slide the drawer back out. Then,
carefully reinsert the drawer into the slot.

3.3. Cable the shelves

Learn how to attach the power cables and power on the drive shelves.
Before you begin
• Install your hardware.
• Take anti-static precautions.
This procedure applies to IOM12 and IOM12B drive shelves.
This procedure is for like-for-like shelf IOM hot-swaps or replacements. This

means you can only replace an IOM12 module with another IOM12 module or
replace an IOM12B module with another IOM12B module. (Your shelf can have
two IOM12 modules or have two IOM12B modules.)
Steps
a. Cable the shelves.
Cable the system according to your configuration. If you need more cabling options than the
examples shown in this section, see Cabling.
For the examples shown in this section, you need the following cables:
10