Intended Use; Assembling The Pumpset - Ardo alyssa double Instructions For Use Manual

en

3. Intended use

The Ardo pumpset should be used in combination with the Ardo breastpumps and is intended for the
expression, collection and storage of breast milk. The pumpset can be used as a single or double pumpset.
4. User risk
There are no known contraindications.
Safety regulations: Only use the pumpset if it is clean (Sections 6 and 7). Check the pumpset for
damage after cleaning.
According to Regulation (EU) 2017/745 on medical devices, any serious incidents that occur in connection
with the product must be reported to the manufacturer and the competent authorities of the Member
State in which the user resides.

5. Assembling the pumpset

Assemble as illustrated. Attach the adapter tube cover so that both marks match up and then rotate to
the right.
Important: Boil before first use (see the section 'Cleaning at home') and check whether the flexible
membrane pot is intact with the smooth side facing outwards.
2
Calypso, Carum, Ardo
Alyssa, Ardo Bellis
Push the insert into the breast shell and fix it by rotating it
slightly.
26 mm
22 mm
Insert the active Optiflow
massage insert into the
31 mm breast shell and pull
the edge of the insert, but not
the lug on the top edge, over
the breast shell.
Calypso, Ardo Alyssa, Ardo
Bellis
28 mm 31 mm