Philips WP3810 User Manual page 14

English
14
Question
Why does water
leak from
the attachment nut?
Why is the water
flow weak at
the unfiltered
setting?
Why is the water
flow is weak at the
filtered setting?
Product specifications
Product type
number and name
Type
Major filter
components
Answer
Perhaps you have not installed the water
purifier properly. Reinstall the water purifier
according to the instructions in this user manual.
Perhaps the attachment nut or the tap-
mounting adapter is damaged. Contact an
authorised Philips service centre.
Perhaps the tap water pressure is higher than
specified.
You may need to wind some Teflon tape around
the thread of the adapter.
Perhaps the stainless steel screen under the
rubber washer inside the water purifier housing
is clogged. Clean it with a toothbrush and rinse it.
Perhaps the filter cartridge is clogged. Replace
the filter cartridge.
Perhaps the tap water pressure is lower than
specified.
WP3811 Philips Micro Pure
Direct tap mount
Polysulphone hollow-fibre membrane and
granular activated carbon