Auto install radio stations
When you connect power and no radio stations are stored, the Micro
Hi-Fi automatically begins to store radio stations.
1
Connect the Micro Hi-Fi to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto install - press the
»
PLAY button) is displayed.
2
Press
[AUTO] (auto) is displayed.
»
The Micro Hi-Fi automatically stores radio stations with
»
sufficient signal strength.
When all the available radio stations are stored, the first
»
preset radio station is broadcast automatically.
Set clock
1
Press and hold CLOCK/DISPLAY to activate the clock setting
mode.
The 12 hour or 24 hour format is displayed.
»
2
Press PROG repeatedly to select 12 hour or 24 hour format.
3
Press CLOCK/DISPLAY to confirm.
The hour digits are displayed and begin to blink.
»
4
Press
5
Press CLOCK/DISPLAY to confirm.
The minute digits are displayed and begin to blink.
»
6
Press
7
Press CLOCK/DISPLAY to confirm.
Tip
•
To view the clock during play, press
until the clock is displayed.
on the main unit to start installation.
/
to set the hour.
/
to set the minute.
CLOCK/DISPLAY repeatedly