Philips MCM167 User Manual page 15

Note
•
Insert the stripped portion of each speaker wire into the socket
completely.
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the same or higher than
the supplied speakers. Refer to the Specifications section of this manual.
1
For the right speaker, find the sockets on the main unit marked
'RIGHT'.
2
Insert the red wire to the red (+) socket. To insert each
speaker wire:
Hold down the socket flap.
a
Insert the speaker wire fully.
b
Release the socket flap.
c
3
Insert the black wire into the black (-) socket.
4
For the left speaker, find the sockets on the main unit marked
'LEFT'.
5
Repeat steps 2-3.