No power
•
Ensure that the AC power plug of the Micro Hi-Fi is connected
properly.
•
Ensure that there is power at the AC outlet.
•
To save power, the Micro Hi-Fi switches to standby
automatically 15 minutes after disc/tape play reaches the end
and no control is operated.
No sound or poor sound
•
Adjust the volume.
•
Disconnect the headphones.
•
Check that the speakers are connected correctly.
•
Check if the stripped speaker wires are clamped.
Left and right sound outputs reversed
•
Check the speaker connections and location.
No response from the Micro Hi-Fi
•
Disconnect and reconnect the AC power plug, then turn on
the Micro Hi-Fi again.
Remote control does not work
•
Before pressing any function button, first select the correct
source with the remote control instead of the main unit.
•
Reduce the distance between the remote control and the
Micro Hi-Fi.
•
Insert the batteries with its polarities (+/– signs) aligned as
indicated.
•
Replace the batteries.
•
Aim the remote control directly at the sensor on the front of
the Micro Hi-Fi.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at the lens has cleared.
•
Replace or clean the disc.
•
Use a finalized CD or correct format disc.