Auto Record From Cd To Tape - Philips MCM167 User Manual

Auto record from CD to tape

1
Select the disc source.
2
Load a disc.
3
Pull at PULL TO OPEN on the front panel to open the tape
button cover.
4
Press
5
Load a tape.
6
Press
Disc play starts automatically from the beginning of the disc.
»
•
To pause recording, press
button again.
•
To stop recording, press
Record a section of a disc to tape
1
During disc play, press and hold
the button.
•
To select a track, press
2
Press
3
Press
Disc play resumes automatically.
»
•
To pause recording, press
button again.
•
To stop recording, press
Tip
•
The best recording level is set automatically. Change of volume and
sound effect does not affect recording.
•
The quality of recorded sound can differ depending on the source
and the tape used.
to open the tape door.
to start recording.
to pause disc play.
to start recording.
. To resume, press this
.
/ to search, then release
/ .
. To resume, press this
.