Yamaha YZ125 2022 Owner's Service Manual page 102

2
1
2. Install:
• Drive chain "1"
TIP
Push the rear wheel "2" forward and install the
drive chain.
3. Install:
• Drive chain puller (left) "1"
• Rear wheel axle "2"
TIP
• Install the drive chain puller (left), and insert the
rear wheel axle from the left side.
• Apply the lithium-soap-based grease to the
rear wheel axle.
2
4. Install:
• Drive chain puller (right) "1"
• Washer "2"
• Rear wheel axle nut "3"
TIP
Temporarily tighten the rear wheel axle nut at
this point.
2
5. Adjust:
• Drive chain slack "a"
Refer to "DRIVE CHAIN SLACK" on page
3-16.
6. Tighten:
• Rear wheel axle nut "1"
• Locknut "2"
1
4-10
REAR WHEEL
2
3
Drive chain slack (Maintenance
Stand)
48.0–58.0 mm (1.89–2.28 in)
Rear wheel axle nut
125 N·m (12.5 kgf·m, 92 lb·ft)
Drive chain puller locknut
19 N·m (1.9 kgf·m, 14 lb·ft)
1
1
2