Before First Use; Daily Use - Electrolux EWF 1497 HDW2 User Manual

Hide thumbs Also See for EWF 1497 HDW2:
Table of Contents

Advertisement

Available languages

Available languages

48
www.electrolux.com
• To activate/deactivate this option
press
until the indicator
off.
8.3 Acoustic signals
The acoustic signals operate when:
• The programme is completed.

9. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Connect the mains plug to the mains
socket.

10. DAILY USE

WARNING!
Refer to Safety chapters.
10.1 Loading the laundry
1. Open the appliance door
2. Empty the pockets and unfold the
items before you put them in the
appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
and
at the same time
comes on/goes
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press
time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
2. Open the water tap.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in
the compartment for washing phase.
5. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
and
at the same

Advertisement

Table of Contents
loading

Table of Contents