Polaris Sportsman Touring XP 1000 EPS 2022 Owner's Manual page 127

SHOCK SPRINGS
The shock absorber springs are adjusted by rotating the cam either clockwise or
counter-clockwise to increase or decrease spring tension.
q
Cam
w
High Tension
e
Low Tension
HANDLEBARS
The handlebars can be adjusted for rider preference.
Improper adjustment of the handlebars or incorrect torquing of the adjuster
block tightening bolts can cause limited steering or loosening of the
handlebars, resulting in loss of control and serious injury or death. Follow the
adjustment procedures exactly, or see your POLARIS dealer for service.
1. Remove the upper headlight pod.
2. Loosen the four handlebar bolts.
3. Adjust the handlebar to the desired height. Be sure the handlebars do not
contact the gas tank or any other part of the machine when turned fully to the
left or right.
4. Torque the front two bolts to specification, then torque the rear two bolts. A
gap of up to 1/8" (3 mm) will remain at the rear of the clamp blocks.
5. Reinstall the headlight pod.
Downloaded from ManualsNet.com
Handlebar bolts:14 ft-lbs +/- 10% (19 Nm +/- 10%)
search engine
WARNING
TORQUE
MAINTENANCE
125