netAlly ETHERSCOPE nXG User Manual page 623

Watch the Wi-Fi status icon
bar to see the channels the EtherScope is
scanning in real time.
NOTE: To adjust the Dwell Time, meaning
the amount of time the EtherScope lingers
on each channel gathering data, enable the
Override Bands and Channels and open the
Wi-Fi Bands and Channels, or open the
General Settings
Channels, accessed from the left-side nav-
igation drawer.
When you finish adding data points, or if you
want to pause, tap STOP.
Tap RESUME to add more data points.
Taking a Connected (Active)
Survey
Use AutoTest to run a Wi-Fi profile and connect
the desired SSID. Tap START to begin the survey.
> Wi-Fi Bands and
623
AirMapper™ App
in the top status