DeWalt XR DCS691 Original Instructions Manual page 30

EngLIsh
CUT-OFF TOOL
DCS691
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Wheel diameter
Wheel bore
No load/rated speed
Wheel perimeter thickness (max.)
Metal
Resin-bonded
Thread size
Water quick connector
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight (without battery pack)
Noise values and vibration values under load (triax vector sum) according to
EN60745-2-22:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
28
WALT one of the
e
EC-Declaration of Conformity
DCS691
Machinery Directive and Radio Equipment
V 54
Directive
DC
1
Li-Ion
mm 230
Cut‑Off Tool
mm 22.2
DCS691
min -1 6600
D
Technical Data are in compliance with:
mm 3.6
2006/42/EC, EN60745-1:2009+A11:2010,
mm 3.6
EN60745-2-22:2011+A11:2013.
M8
These products also comply with Directive 2014/30/EU,
2014/53/EU and 2011/65/EU. For more information, please
mm 12.5
contact D
the manual.
MHz 433
The undersigned is responsible for compilation of the technical
mW 0.03
file and makes this declaration on behalf of D
kg 5.7
dB(A) 105
Markus Rompel
dB(A) 116
Director Engineering
D
dB(A) 3.0
65510, Idstein, Germany
m/s 2 5.0
15.03.2022
m/s 2 1.5
D
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WALT declares that these products described under
e
WALT at the following address or refer to the back of
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008 AND RADIO EQUIPMENT
REGULATION 2017
Cut‑Off Tool
DCS691
WALT declares that these products described under
e
WALT.
e