Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DeWalt DW700
Summary of Contents for DeWalt DW700
- Page 1 ® DW700...
- Page 2 16 4...
- Page 3 25 26 27 29 26 27 25...
- Page 4 45°...
-
Page 6: Specifications
E N G L I S H CROSS-CUT MITRE SAW DW700 Congratulations! EC-Declaration of conformity You have chosen a D WALT product. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional users. - Page 7 E N G L I S H Safety instructions 17 Do not abuse cord When using Power Tools, always observe the safety regulations Never carry the tool by its cord or pull it to disconnect from the socket. applicable in your country to reduce the risk of fire, electric shock Keep the cord away from heat, oil and sharp edges.
- Page 8 E N G L I S H Package contents The package contains: 31 Legstand 1 Partly assembled machine 33 Roller table 1 Allen key Electrical safety 1 Pin spanner 1 216 mm TCT saw blade The electric motor has been designed for one voltage only. Always check 2 Coach bolts that the power supply corresponds to the voltage on the rating plate.
- Page 9 E N G L I S H Assembly Adjusting the traverse bars for constant cutting depth (fig. A1, G1 & G2) The blade must run at a constant cutting depth along the full length of the table and must not touch the fixed table at the rear of the slot or at the Prior to assembly always unplug the tool.
- Page 10 E N G L I S H Instructions for use Vertical straight cross-cut (fig. A1 & N) • Loosen the mitre clamping knob (12) and lift the positive stop lever (11) • Always observe the safety instructions and applicable upwards (fig. A1). regulations.
- Page 11 E N G L I S H Optional Accessories • Follow the horizontal intersecting line to either side to get the mitre angle setting on the saw (23°). Dust extraction • Likewise follow the vertical intersecting line to the top or bottom to get A dust extraction kit DE7777 consisting of 3 hoses, a 3-way connector, the bevel angle setting on the saw (40°).
- Page 12 E N G L I S H Range of saw blades available (recommended blades) GUARANTEE Tungsten carbide Application Diameter Teeth • 30 DAY NO RISK SATISFACTION GUARANTEE • tipped (TCT) If you are not completely satisfied with the performance of your Negative tooth For wood, boards WALT machine, simply return it within 30 days, complete as...
- Page 13 Belgique et Luxembourg WALT Tel: 02 719 07 12 België en Luxemburg Weihoek 1, Nossegem Fax: 02 721 40 45 1930 Zaventem-Zuid Service fax: 02 719 08 10 Danmark WALT Tlf: 70 20 15 10 Hejrevang 26 B Fax: 48 14 13 99 3450 Allerød Deutschland WALT...