Table of Contents
Advertisement
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always " U Spot".
This mode takes readings of a small area in the center of the image.
Spot
U
This setting works well with focus lock (page 90).
You can move the focus frame by using [8], [2], [4], and [6] to move
the focus point and then pressing [SET]. To change the focus point
Free
—
position, select "— Free" again and then use [8], [2], [4] and [6] to
select the position you want.
When you half-press the shutter button while this setting is selected, the
O
Tracking
focus frame will follow the movement of the subject.
Focus point
• " O Tracking" cannot be used in combination with the following features.
Prerecord CS, some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion
Image, Lag Correction, Expression CS, Baby CS, Child CS, Pet CS, Sports CS)
• "— Free" cannot be selected for the AF area while Face Detection is enabled.
" U Spot" or " O Tracking"
"— Free"
*
[SET]
Focus frame
93
Focus frame
Advanced Settings
Advertisement
Table of Contents
