Shooting an Image in Accordance with Subject Movement
(Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject
moves into or moves out of a frame on the monitor screen. You also can configure the
camera to record images of what happened immediately before and after the subject
moves.
Automatically records what happened immediately before and
Move Out CS
after the subject moves outside of a boundary on the monitor
screen.
Automatically records what happened immediately before and
Move In CS
after the subject moves into a boundary on the monitor screen.
. To setup the camera
1.
In the REC mode, press [BS].
2.
Select "Move Out CS" or "Move In CS" and then press [SET].
3.
Press [SET].
4.
Configure the boundary location and size
settings.
[8] [2] [4] [6]
Zoom controller
5.
Press [SET].
• If you want to reconfigure the settings, start again
from step 3.
6.
Press [2].
7.
Use [8] and [2] to select the fourth control panel option from the
bottom (High Speed CS fps).
Moves the boundary.
Resizes the boundary.
78
Boundary
Using BEST SHOT