Table of Contents
Advertisement
3.
Half-press and hold the shutter button to start pre-recording of images.
A preset number of images are pre-recorded. The pre-recorded images are
continually updated until you full-press the shutter button.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
• The camera will not emit shutter sounds as it pre-records images.
4.
Press the shutter button the rest of the way down.
This will save the pre-recorded images and start shooting new images in real-
time. Images continue to be shot as long as you keep the shutter button
depressed.
5.
Shooting will stop when you release the shutter button or after the
maximum number of shots is reached.
6.
Save the CS images (page 54).
NOTE
• CS settings ("High Speed CS" and "Normal Speed CS") are enabled when shooting
with these BEST SHOT scenes. Precautions and control panel operations are the
same as those that apply to "High Speed CS" (page 50) and "Normal Speed CS"
(page 49). Note, however, that the A, S, and M exposure modes cannot be used.
• When using High Speed CS, Prerecord CS (pre-recording of images before the
shutter button is full-pressed) is not performed if you full-press the shutter button
without half-pressing first. Whenever possible, be sure to half-press the shutter
button, compose the image, and then full-press the shutter button.
84
Using BEST SHOT
Advertisement
Table of Contents
