Table of Contents
Advertisement
Switching Between Systems
Hot Desk Log-on
Removing a Subscription
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 3 (25/09/2002)
If the phone has been subscribed to several systems, you must select
which system to currently use.
1.
Press MENU and then > until LOGIN appears, then press
2.
SELECT LOGIN appears, press
3.
Press > until required SYSTEM number appears.
4.
When the required SYSTEM number appears, press
bleeps and SELEC LOGIN.
Either, press MENU to exit, or , for multi-site working, press
5.
Your handset bleeps and SELEC LOGIN is displayed.
6.
Press MENU to exit.
To log on as a Hot Desk user you need to know the extension number and
the passcode for that extension number.
To Log on enter the following shortcode:
*35*Extension Number*Passcode# then press
When you will hear a double beep press
E.g. if your extension number is 401 and the passcode is 1234 you would
enter:
*35*404*1234#
To log off you need to enter:
*36 then press
When you will hear a double beep press
If necessary, you can remove a subscription from the handset.
DO NOT DO THIS LIGHTLY as you may not be able to re-subscribe
without assistance from your System Maintainer.
1.
Press MENU and then > until LOGIN appears, then press
2.
SELECT LOGIN appears.
3.
Press > until required SUBSCRIPTION REMOVE appears,
then press
.
4.
Enter your password and press
5.
SUBSCRIPTION REMOVE appears, press
the system you wish to remove appears
6.
Press
again to remove the system.
7.
If the system removed was the one currently in use, you need to
LOGIN to another system (see page 11).
8.
Press MENU to finish.
.
.
.
Switching Between Systems - Page 11
Subscribing - Page 11
.
. Your handset
.
.
again.
again
.
and then press > until
Advertisement
Table of Contents
