Table of Contents
Advertisement
Using the Handset
Switching On/Off
Answering Calls
Making Calls
Last Number Redial
Locking the Keyboard
Recall
Call Waiting
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 4 (27th October 2003)
To switch the handset on press and hold down
switch the handset off, press
•
Signal Symbol
Indicates a base station in range and that your 20DT handset is ready for use.
If the symbol flashes the base station is busy with its maximum number of
calls.
•
Off-Hook Symbol
Shown when making calls and during conversations. Use
disconnect.
To answer an incoming call: Press
To cancel a message waiting lamp: Press ∗, 2 and
1. Press
and then dial the number required
(prefix external calls with 9). Or
2. Dial the number required and press
1. To access the redial stack (up to 10 different numbers) press REDIAL.
2. Press > until the required number appears (from newest to oldest).
3. Press
to call the desired number.
You can lock the handset keys. This stops calls being accidentally started.
Whilst locked the handset displays KEY LOCKED. You can still answer calls by
pressing the
key.
1. To lock or unlock the keyboard, press MENU and then LOCK.
The R key produces a 'recall' signal and is used to Hold calls. When a call is
held, you will hear a dial tone. In addition, some PBX's may need this 'recall'
signal to access specific functions.
If your phone has the call waiting feature set (consult your system manager),
then when someone else calls you during a call, the display will show CALL
WAITING.
1. To answer a Call Waiting, press
again.
2. You will be connected to the waiting call.
Using the Handset - Page 13
until INDeX appears. To
until you hear a tone and the display clears.
.
.
to end your current call and press
key to
twice.
Switching On/Off - Page 13
,
Advertisement
Table of Contents
