Table of Contents
Advertisement
C H I M N E Y I N S TA L L AT I O N
The lower chimney bracket is used to fix the upper decorative chimney and lower decorative
chimney. Use 2pcs 4x8mm screws to attach lower chimney and lower chimney bracket together.
Put the lower chimney on the cooker hood and mark the location of lower chimney bracket fixing
holes on the wall.
N OT E :
Do not fasten screws too much, make sure upper decorative chimney can be telescopically
adjusted after assembled.
Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall by 2 screws
(4mm x 30mm).
Then pulling out the upper chimney upwards to the target height. Adjust to reach the height
required.
Fix the upper chimney on the upper chimney bracket by 2 screws (4x8mm). Then fix the upper
chimney bracket on the wall. Before fixing the bracket on the wall, you can decide the upper
chimney bracket fixing holes for installation.
Wall Plug
Plate ||
Please keep this instruction manual for future reference
Lower Chimney (Outer)
Upper Chimney (Inner)
Lower Chimney bracket
Screw (4mm x 8mm)
Screw (4mm x 30mm)
Instruction manual CGC611 CGC711 CGC911 13
Advertisement
Table of Contents
