Caple CGC611 Instruction Manual page 12

After hanging the hood on the bracket, remove the grease filters, mark 2 holes inside the hood for
safety screws. After marking, remove the hood, drill two holes and insert 2 wall plugs and finally
fix the safety screws with 2 screws (ST4x30mm).
Fix the one-way-valve to the air outlet of the cooker hood. Then, attach the exhaust pipe onto the
            
one-way-valve as shown below.

Exhaust Pipe
Exhaust pipe
Cooker hood
Cooker Hood
    
 
          

12 Instruction manual CGC611 CGC711 CGC911
Please keep this instruction manual for future reference