Control Settings - Philips 32HFL5332 User Manual

Welcome message
The Welcome message function allows the TV
to show a customized greeting to the hotel
guest whenever the TV is switched on. This
helps to personalize the hotel experience for
guests. The Welcome message can consist
of 5 lines of text, with each line containing a
maximum of 25 alphanumeric characters. Use
▲▼◄► on the remote control to compose
the Welcome message.
Note
Welcome message is always disabled if you
•
select [Control settings] > [OSD display]
> [Off.]
• [Display message]:
• [Off]: Closes welcome message.
• [On]: Displays customized
welcome message. (Sets
customized messages from Line 1
to Line 5 below mentioned).
• [Chinese]: Displays a Chinese
Welcome Message.
• [Line 1]: Sets the characters of the
first line message.
• [Line 2]: Sets the characters of the
second line message.
• [Line 3]: Sets the characters of the
third line message.
• [Line 4]: Sets the characters of the
fourth line message.
• [Line 5]: Sets the characters of the
fifth line message.
• [Clear]: Clear the settings in Line 1 to
Line 5.
• [Message Time-out]: Sets the period
of time to display the welcome
message on the screen when TV is
turned on from standby / Off.
EN
28

Control settings

[Local KB lock]
• [Off]: The TV local buttons will
function normally.
• [On]: The TV local buttons are locked
(POWER) button.
except
B
• [All]: All TV local buttons are locked,
including
B
[RC lock]
Disables the operation of the Guest remote
control.
• [Off]: All buttons on Guest remote
control will function normally.
• [On]: All buttons on the Guest
remote control are disabled. (It is
still possible to enter the Professional
setup menu by pressing [3, 1, 9, 7, 5, 3
+ ¬(MUTE)]).
[OSD display]
Sets this function to show or hide screen
information.
• [Off]: Screen information is
suppressed.
• [On]: Normal screen information is
displayed.
[High security]
• [Off]: Professional mode setup menu
can be accessed by both Guest
remote control (Press [3, 1, 9, 7, 5, 3
+ ¬(MUTE)]. )and the Professional
setup remote control
(Press M button)
• [On]: Professional mode setup
menu can only be accessed by the
Professional setup remote control.
(POWER) button.