4.3 Switch On Settings; 4.4 Control Settings - Philips 20HFL3330D/10 User Manual

4.3 SWITCH ON SETTINGS

• SWITCH ON VOLUME - The TV will always switch
on (via mains-switch or standby) to this preset value.
The On volume setting cannot exceed the max
volume. The current volume should follow the on
volume, and adjusting on volume should also affect
the current volume.
• MAXIMUM VOLUME – refers to the maximum
volume which the guest could adjust to.
• SWITCH ON CHANNEL – choice of channel
number (analog or digital) or an external video
source to go to when the TV set is switched on from
mains power or standby. In case of LAST STATUS
setting, the set will switch to the last channel or
source before the TV went to standby or mains
power off. This LAST STATUS setting takes priority
over the APPLICATION settings.
• POWER ON – Refers to power state after mains
power on. ON means the set should turn On after
mains power on, while Standby means the set
should turn to standby. LAST STATUS means that
the set should switch to the last power state before
mains power off.
• DISPLAY MESSAGE – Enable the display of the
welcome message for 30 secs after switching on the
set from mains power or standby. However, if OSD
Display is OFF, the welcome message display is
always disabled, regardless of the Display Message
Setting
PB7
• WELCOME MESSAGE – Define welcome message
of 2 lines of 20 alphanumeric characters each. The
characters used depend on the language selected
for consumer operation.
The letters are entered and navigated through cursor
keys and digit keys.

4.4 CONTROL SETTINGS

• TELEVISION BUTTONS LOCKED – Selection of
television buttons locked or unlocked. ON means all
television buttons are locked, except the Power
button, OFF means all television buttons are enabled,
while ALL means all television buttons are locked,
including the Power button.