Functional Check And Camera Adjustment; Faults; Operation - Ametek Motec MC5201 Series Installation And Operating Instructions Manual

3.3

Functional check and camera adjustment

Check the camera functionality after you have connected it to a monitor. Switch
EN
the camera display to mirror image (see operating manual of monitor/control
unit). Align the camera so that the mandatory field of view is displayed on the
monitor. Tighten the fastening screws on the camera completely. Seal any cable
breakthroughs and check cables that were laid to ensure they are securely in
place. The camera does not have any accessible controls. It is placed in operati-
on by switching on the monitor. For information about the monitor please consult
the corresponding operating manual.
3.4

Faults

If a nonfunction or error is detected during operation, normally the first thing to
do is check the external circuit (fuse, power supply voltage, wiring, monitor etc.).
If the malfunction or or the errors are clearly attributed to the camera, so is this,
send it back together with a description of the fault and the RMA form (www.
motec-cameras.com/en/service/returns), to the factory.
4

Operation

Motorised zoom camera MC5201 is operated with the aid of operating panel
MBE5201-1. Please refer to the relevant operating instructions for information
on commissioning and operation of this unit. The motorised zoom camera and
the suspended mounting have no control or operating elements. No adjustments
are required after installation.
After switching the system on (and, if applicable, after successfully commis-
sioning the VS5201-1 video transmitter and the VE5201-1 video receiver), the
MC5201 motorized zoom camera initializes. Camera operation via the MBE5201-
1 operating unit is possible only after initialization has been completed. (Please
see the MBE5201-1 User Manual for a description of how video transmitter and
video receiver are commissioned).
20