Technical Data Mc5201 - Ametek Motec MC5201 Series Installation And Operating Instructions Manual

based on the requirements of the relevant "harmonised standards". You will find
the CE mark on the product and also on the accompanying product documen-
tation. We will be happy to provide you with a separate EC Declaration of Con-
formity upon request. If modifications are made to the device, compliance with
the requirements of conformity is no longer ensured and the warranty becomes
void. In case of use outside the EU, the user is required to comply with relevant
national requirements.
1.3

Technical data MC5201

Housing protection class
Shock resistance
Vibration resistance
Housing
Field of view
Zoom factors
Light sensitivity
Image sensor/Resolution
Video signal
Camera control
Voltage supply
Power consumption
Operating temperature
Storage temperature
Weight
Glass heating
Salt fog resistant
Connector
IP68
50 g
10 g
Aluminum, anodized
Horizontal: 55.4 °...2.9 °, vertical: 32.6 °...1.6 °
20 x optical, 32 x digital (640 x Zoom, Autofocus)
0.5 lux
1/3" CMOS-Sensor / 2.12 MPixel
Analog video (PAL)
CAN Bus, Motec System Bus (MSB 2.0)
24V DC (18 V...32 V DC) Protection against
overvoltage and incorrect polarity
Max. 12 W
-35 °C...+60 °C
-40 °C (Warm up time 15 minutes until proper
function. During this time, do not zoom.)
-40 °C...+85 °C
1.25 kg
Automatically controlled
IEC 60068
Connector M16, male, 7-pin
EN
15