Yamaha YZ85 2021 Owner's Manual page 35

ITEM
Steering
Front fork and rear shock ab-
sorber assembly
Chassis fasteners
Moving parts and cables
Exhaust system
Engine stop switch
Ignition system
• Check that the handlebar can be turned smoothly and has no excessive play.
• Check that they operate smoothly and there is no oil leakage.
• Make sure that all nuts, bolts and screws are properly tightened.
• Check all cotter pins for damage and correct installment.
• Tighten or replace if necessary.
• Check the control cables for damage.
• Check that the control cables move smoothly.
• Check that the control cables are not caught when the handlebars are turned or
when the front forks travel up and down.
• Lubricate moving parts and cables if necessary.
• Check that the exhaust pipe and muffler are tightly mounted and have no cracks.
• Check for leakage.
• Check operation.
• Check that all leads and cables are properly connected.
For your safety – pre-operation checks
CHECKS
5-3
PAGE
7-25
4-8, 4-10, 4-11, 7-25
—
7-22, 7-23, 7-24, 7-24
5
—
4-1
7-7